Events Reporting Configuration
Turn Off Services
This setting limits services and is primarily used in conjunction with monitoring
data usage. For example, you could set the AirLink gateway to limit network
service when data usage exceeds a configured threshold. For more information,
see
Data Usage
on page 287.
Figure 10-8: ACEmanager: Events Reporting > Action > Action Type > Turn Off Services
Turn Off Services does not turn off all network use. Reports are still sent and
over-the-air access to the device is allowed. You can still access the AirLink
gateway locally, but Ethernet, USBnet, and Wi-Fi host access to the mobile
network is blocked.
Report Data Group
For email, SMS, and Events Protocol (TLV, Binary, CSV-ASCII, and XML)
messages, you can select the data you want to be included in the report. Check
the box corresponding to the data displayed. By default, all the boxes are clear.
Figure 10-9: ACEmanager: RV50 Events Reporting > Actions > Data Group
Rev 1 Dec. 17
257
41111088