I/O; Applications - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table D-12: Input / Output AT Commands
Command
*ANALOGIN[n]?
*DIGITALIN[n]?
*PULSECNT1?
*RELAYOUT1
Table D-13: Applications > Data Usage Commands
Command
*DATACURDAY?
*DATACURDAYSIM1?
Rev 1 Dec. 17

I/O

Description
Query individual analog input values (in volts).
AT*ANALOGIN[n]?
n=1
•
Query individual digital inputs. The digital inputs report either a 0 (open) or 1 (closed).
AT*DIGITALIN[n]?
n=1)
•
Query the I/O pulse counts for digital in.
AT*PULSECNT1?
Query or set the relay status.
AT*RELAYOUT1? to query
AT*RELAYOUT1=n to set
n=0—OFF
•
n=1—Drive Active Low
•

Applications

Description
Display data usage for the current day (in kB).
Example:
AT*DATACURDAY?
<value>
OK
If this command is used with an AirLink RV50 Series gateway, the query or set
applies to the Active SIM. Use
to query or set a specific SIM card, based on the slot it is installed in.
Display data usage for the current day (in kB) for the SIM card in Slot 1 (upper
slot).
Example:
AT*DATACURDAYSIM1?
<value>
OK
464
*DATACURDAYSIM1? or *DATACURDAYSIM2?
41111088