Sierra Wireless AirLink RV50 Series User Manual page 219

Rev 1 Dec. 17
To configure LDAP:
1. Go to Services > Authentication.
2. In the LDAP Client field, select Enable.
Figure 8-20: ACEmanager: Services > Authentication > LDAP
3. Enter:
· The LDAP server IP address or resolvable domain name
· The Port number (default is TCP port 389)
4. Ensure that the LDAP server IP address/port is reachable not only from outside
the company, but also from inside the mobile network your gateway is on.
You can use a utility such as netcat to test this. If netcat is available try:
nc -z <IP> <port>; echo $?
0 means success; 1 means failure.
219
Services Configuration
41111088