Table D-4: WAN / Cellular AT Commands
Command
*EVDODIVERSITY
*EVDOROAMPREF
*HANGUPTORESET
*IPPING
Rev 1 Dec. 17
CDMA only. For HSPA device, see
Query or set EV-DO Diversity, which allows two antennas to provide more consistent
connection.
AT*EVDODIVERSITY? to query
AT*EVDODIVERSITY=n to set
n=0—Disabled
•
n=1—Enabled
•
Note: If you are not using a diversity antenna, *EVDODIVERSITY should be disabled.
CDMA and LTE fallback to EV-DO only.
Query or set the network roaming preference.
AT*EVDOROAMPREF? to query
AT*EVDOROAMPREF=n to set
n=0—Automatic
•
n=1—Home only
•
HSPA only.
Query or set forcing the radio module to reset when the device disconnects.
AT*HANGUPTORESET? to query
AT*HANGUPTORESET=n to set
n=0—Disable
•
n=1—Enable
•
Query or set the ping monitor test interval (in minutes) for an interface.
AT*IPPING?<interface> to query the ping monitor test interval
interface=1—Cellular network
•
interface=2—Wi-Fi network
•
interface=3—Ethernet WAN network
•
AT*IPPING=<interface>,n to set the ping monitor test interval for an interface
interface=1—Cellular network
•
interface=2—Wi-Fi network
•
interface=3—Ethernet WAN network
•
n=0—Disable pinging (default)
•
n=15–255 minutes
•
If no interface is specified, the command applies to the cellular network.
Note: 15 minutes is the minimum interval. If you set *IPPING for a value between 0
and 15, the idle interval for pings will be 15 minutes.
415
Description
*RXDIVERSITY (3G Only)
AT Commands
on page 422.
41111088