Sierra Wireless AirLink RV50 Series User Manual page 96

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
Do not include devices in the policy if they need to access ACEmanager.
You can create rules based on two components:
• Destination IP address/destination subnet mask
• Source IP address/source subnet mask
Any component left with its default value is excluded from the traffic filtering.
Example:
If Source IP/subnet mask and Destination IP/subnet mask are configured, traffic
from specific LAN hosts with a remote destination matching the configured
destination IP and subnet mask uses the policy and is sent over the configured
interface. All other traffic uses the current active WAN interface.
Note: It is possible to configure a policy routing rule in such a way that you could lose the
network connection you are using to configure the gateway with ACEmanager. For
example, if you are using ACEmanager through an Ethernet connection to configure the
gateway with IP address 192.168.13.100 and you inadvertently configure a rule to send all
traffic destined for 192.168.13.100 over the cellular interface, the Ethernet connection you
are using to configure the gateway will be lost. If that happens, use a different IP address.
Figure 4-19: ACEmanager: Policy Routing
96 41111088