Trace Level Logging; Remote Logging - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
3. Optional: To display Linux Syslog:
a. Ensure that Display (default value) is selected the drop-down menu
beside Linux Syslog.
Note: At any point, you can click the buttons on the upper right portion of the screen to:
Refresh the screen.
•
Cancel the selected settings.
•
Return the screen to the Default settings.
•
4. Click Apply.
5. If you have changed any of the verbosity levels or the Linux syslog setting:
a. Reboot the AirLink gateway.
b. Log into ACEmanager, go to Admin > Log.

Trace Level Logging

Use this option only if you are specifically asked to do so by Sierra Wireless or an
authorized distributor.
To enable trace level logging:
1. In the Trace level logging field at the bottom of the page, select Enable.
2. Click Apply.
3. On the left menu, click View Log.

Remote Logging

Remote logging enables you to send logs to a remote server.
To configure remote logging
1. In ACEmanager, go to Admin and from the menu on the left, select Remote
Logging.
2. In the Remote Syslog field, select Enable.
1. You can also use an AT command to configure remote logging.
See *REMOTELOG
322
1
:
on page 469.
41111088