Sierra Wireless AirLink RV50 Series User Manual page 419

Table D-4: WAN / Cellular AT Commands
Command
*NETPWSIM1
*NETPWSIM2
*NETUID
Rev 1 Dec. 17
Query or set the mobile network account password for the SIM card in Slot 1 (upper
slot).
AT*NETPWSIM1? to query
AT*NETPWSIM1=<password> to set (up to 128 characters)
Note: AT*NETPWSIM1? returns asterisks (****) for privacy.
Examples:
ATNETPWSIM1?
*******
OK
AT*NETPWSIM1=<password>
OK
Query or set the mobile network account password for the SIM card in Slot 2 (lower
slot).
AT*NETPWSIM2? to query
AT*NETPWSIM2=<password> to set (up to 128 characters)
Note: AT*NETPW? returns asterisks (****) for privacy.
Examples:
ATNETPWSIM2?
*******
OK
AT*NETPWSIM2=<password>
OK
Query or set the mobile network account user ID, if required.
AT*NETUID? to query
AT*NETUID=<uid>(up to 128 characters)
•
AT*NETUID?
<uid>
OK
AT*NETUID=<uid>
OK
If this command is used with an AirLink RV50 Series gateway, the query or set
applies to the Active SIM. Use
specific SIM card, based on the slot it is installed in.
419
Description
*NETUIDSIM1 or *NETUIDSIM2
AT Commands
to query or set a
41111088