Sierra Wireless AirLink RV50 Series User Manual page 151

Field
Primary VPN
Secondary VPN
Revertive
Primary VPN Status
Secondary VPN
Status
Rev 1 Dec. 17
Figure 6-6: ACEmanager: VPN > Failover
Description
ID of the primary VPN (for VPN Failover) i.e. VPN 1, VPN 2, VPN 3, VPN 4, VPN 5, or
None (None is the default.)
ID of the Secondary VPN (for VPN Failover) i.e. VPN 1, VPN 2, VPN 3, VPN 4, VPN 5, or
None (Default is None.)
When VPN Failover is configured and this field is set to Enable, traffic automatically
switched from the Secondary VPN back to the primary VPN when the failure is resolved
and the primary VPN tunnel is up again. Options are
Enable (default)
•
Disable
•
Status of the primary VPN:
Disabled—VPN Failover is disabled. (default)
•
Connecting—The VPN is trying to connect to the responder.
•
Active—The VPN tunnel is ready and transferring traffic.
•
Backup—This is currently the backup VPN connection.
•
Failed—Dead Peer Detection (DPD) has determined that the VPN responder is dead,
•
or a ping sent to the VPN host failed.
Out of Service—There have been 5 DPD failures within an hour.
•
Status of the Secondary VPN:
Disabled—VPN Failover is disabled. (default)
•
Connecting—The VPN is trying to connect to the responder.
•
Active—The VPN tunnel is ready and transferring traffic.
•
Backup—This is currently the backup VPN connection.
•
Failed—Dead Peer Detection (DPD) has determined that the VPN responder is dead,
•
or a ping sent to the VPN host failed.
Out of Service—There have been 5 DPD failures within an hour.
•
151
VPN Configuration
41111088