Location - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table D-8: Services AT Commands
Command
Time (SNTP) Commands
*SNTP
*SNTPADDR
Table D-9: Location AT Commands
Command
*GPSDATA?
*PGPS
Rev 1 Dec. 17
Description
Query or set daily SNTP updates of the system time.
AT*SNTP? to query
AT*SNTP=n to set
n=0—Off
•
n=1—On
•
SNTP Server IP address, or fully-qualified domain name, to use if *SNTP=1.
AT*SNTPADDR? to query
AT*SNTPADDR=[d.d.d.d] or [NAME]
d.d.d.d=IP Address
•
NAME=FQDN
•

Location

Description
Queries ALEOS and provides a snap-shot of the current location data used for reports.
This command is independent of all location configuration. You don't need to have a
server configured or any specific report type selected, and location reporting does need
to be enabled. The response to this command lists the fix status, satellite count, and
latitude and longitude in decimal degrees. It is not formatted as a Location report.
For example:
AT*GPSDATA? returns:
Location Fix=1
Satellite Count=8
Latitude=+49.17081
Longitude=-123.06970
Location Fix=1 — Location fix acquired
•
Location Fix=2 — Differential location fix acquired
•
Query or set the serial streaming interface ports that the reports are sent to.
AT*PGPS? to query
AT*PGPS=n to set
n=0—None
•
n=1—DB9 Serial
•
n=2—USB Serial
•
n=3—DB9 and USB
•
446 41111088