Sierra Wireless AirLink RV50 Series User Manual page 228

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table 9-1: Location: Global Settings
Field
General — These fields only appear if Location Service is enabled.
Odometer Value
(meters)
TAIP ID
Send SnF Buffer
immediately on input
Use Device ID in
Location Reports
Rev 1 Dec. 17
Description
The odometer value increments based on the location distance traveled. You can include
this value in RAP location reports. (See
You can set the odometer value to an initial value in meters (kilometers × 1000 or
miles × 1609.344). Maximum value is 4 294 967 295 meters (4,294,967 kilometers or
2,668,769 miles).
Default: 0
Note: The RAP report displays the odometer value in 100s of meters.
You can also use an AT Command to set this value. For more information, see
*PPODOMVAL on page 451.
The four character alphanumeric ID used in all TAIP reports
You can also use an AT Command to set this value. For more information, see
on page 452.
If this feature is enabled, any pending stored reports are sent if the I/O input changes, a
stationary vehicle is moved, or a maximum speed is exceeded, provided those events are
enabled on the Location > Server > Events screen. Options are:
Disable (default)
•
Enable
•
You can also use an AT Command to set this value. For more information, see
*PPFLUSHONEVT on page 448.
Allows use of the IMEI/ESN or phone number in RAP reports configured for Servers 1–4 to
identify a device/vehicle. Options are:
None (default)
•
Phone Number
•
ESN/IMEI
•
You can also use an AT Command to set this value. For more information, see
on page 448.
Tip: Including the device ID is especially useful when your devices have dynamic IP
addresses.
Note: The device ID in RAP reports is in hex, not plain text.
Note: This option does not apply to Local IP reports. If you want the device ID included in
local IP location reports, see
Note: If you want this Device ID included in the TCP PAD connections, enable the Include
Device ID on TCP Connect field on the Serial screen (Serial > Port Configuration > TCP).
See Port Configuration on page 264.
228
Location Report Type
Device ID in Local Reports
on page 234.)
*PPTAIPID
*PPDEVID
on page 246.
41111088