Port Forwarding; Sms - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
If you see the following lines in the log, it means the VPN Server is not answering.
notice openvpn[9199]: [UNDEF] Inactivity timeout (--ping-restart), restarting
notice openvpn[9199]: TCP/UDP: Closing socket
Check the VPN Server status.
When I configure a VPN, my Internet connection stops working.
When you configure a VPN, outgoing traffic from the host to the public Internet is
blocked by default, as a security measure. If you want to enable public Internet
traffic from the host:
1. In ACEmanager, go to VPN > Split Tunnel.
2. Change the Outgoing Host Out of Band field to Allowed.
3. Click Apply.

Port Forwarding

I set up port forwarding rules. I did not receive an error message, but
it seems that data is not being forwarded.
If the Public Start Port and Public End Port fields are not set up correctly, data is
not forwarded.
1. In ACEmanager, go to Security > Port Forwarding.
• If you are forwarding data to a single port:
· Ensure that the value in the Public Start Port field is not 0.
· Ensure that the value in the Public End Port field is 0.
· Ensure that the value in the Private Port start field is not 0.
• If you are forwarding data to a range of ports:
· Ensure that the value in the Public Start Port field is not 0.
· Ensure that the value in the Public End Port field is greater than the value in
Public Start Port field.
· Ensure that the value in the Private Port Start field is not 0.
For complete instructions, see

SMS

I tried to send an SMS message, and received an error code. What
does the error code mean?
The following acknowledgment error codes may appear if your message was not
successfully sent:
Code: Explanation:
100 Not in coverage (no cellular service)
201 Parse Error on field #1 (Start Field)
202 Parse Error on field #2 (Phone number and separator)
492
Port Forwarding on page 153.
41111088