Sms Modes - Sierra Wireless AirLink RV50 Series User Manual

Rev 1 Dec. 17
Table 8-3: SMS Command Formats
Mode
Gateway Only
Note: Insert a space before and after [Password]; no space between [Prefix] and
[Command].
Examples:
[Prefix][Command]
"&&&reset", where:
· &&& is the prefix
If the ALEOS Command Prefix field in ACEmanager (Services > SMS) is
blank, the prefix is not required.
· reset is the command
PW [Password] [Prefix][Command]
"PW 1234 &&&reset", where:
· 1234 is the password
For more information, see
· &&& is the prefix
If the ALEOS Command Prefix field in ACEmanager (Services > SMS) is
blank, the prefix is not required.
· reset is the command
For information on sending SMS commands and a list of available commands,
see page 471.
Note: The maximum length of the ALEOS Command Prefix is 3 characters (alphanumeric
or special characters).

SMS Modes

The first step in configuring SMS is to select the SMS mode from the following
options:
• Password Only—See
• Control Only— See
• Gateway Only—See
• Control and Gateway—See
• Outbound Only—Select this mode if you plan to use
commands to manage SMS messages. When you choose this mode, inbound
messages are stored on the radio module until another mode is chosen. Note
that inbound messages could be lost if the storage becomes full.
For a list of available SMS commands, see page 471. For a list of SMS-related AT
commands, see SMS on page 440.
189
SMS Password Security
page 190.
page 191.
page 192.
page 198.
Services Configuration
SMS Command Format
PW [Password] [Prefix][Command]
on page 203.
+CMGD or +CMGL
41111088
AT