Sierra Wireless AirLink RV50 Series User Manual page 77

IP Address Preference
Band Setting
Current Radio Module
Band
Setting for Band
Band 26
Band 41
Advanced
Set Carrier (Operator)
Selection
Rev 1 Dec. 17
Use this field to select the preferred IP Address version. To use IPv6, it must be
supported by your Mobile Network Operator and your account (SIM and APN).
Options are:
IPv4—When the gateway connects to the mobile network, it is assigned only an
•
IPv4 address.
IPv4 and IPv6 Gateway—When the gateway connects to the mobile network, it is
•
assigned an IPv4 address and an IPv6 address. The IPv6 address and routing
information are passed to the LAN clients so that they can acquire IPv6 addresses
and pass IPv6 traffic over the mobile network.
Note: The LAN client must have IPv6 enabled and must be configured to use SLAAC
(Stateless address auto configuration). The IPv6 address and routing information, and
DNS servers are passed to the LAN clients via SLAAC.
Note: Other than routing IPv6 packets between the WAN and the LAN, no other AirLink
features are supported on IPv6.
The IP addresses are displayed on the Status > Home screen.
Note: For more information, see
Band reported by the radio module as the one currently in use.
For setting band details for your gateway, see
Setting for Band—RV50X
These fields appear only on the RV50X. They allow you to disable Band 26 and Band
41. Leave the default settings unless advised by your Mobile Network Operator to
change them.
Manually specify an operator. Enter the desired parameters in the following format:
mode[,format[,oper]]
mode= 0: Automatic — any affiliated carrier [default]
•
mode= 1: Manual — use only the operator <oper> specified
•
mode= 4: Manual/automatic — if manual selection fails, goes to automatic mode
•
format= 0: Alphanumeric ("name")
•
format= 2: Numeric
•
oper="name"
•
See also +COPS on page 412 and
Note: Not all carriers or accounts allow specifying the operator. If the carrier doesn't
support it, this command may appear to fail.
77
IPv6 Support on page 79.
Setting for Band—RV50
on page 488.
*NETOP? on page 406.
WAN/Cellular Configuration
on page 481 or
41111088