Sierra Wireless AirLink RV50 Series User Manual page 246

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table 9-4: Location: Local/Streaming — Local IP Report
Field
Device ID in Local
Reports
Local Report
Destination IP
Report Odometer
Report Digital Inputs
Rev 1 Dec. 17
Description
Allows use of the IMEI/ESN or phone number in local IP RAP reports to identify a device/
vehicle. Options are:
None (default)
•
Phone Number
•
ESN/IMEI
•
Tip: Including the device ID is especially useful when your devices have dynamic IP
addresses.
Note: If you want the device ID included in all other RAP location reports, see
ID in Location Reports on page 228.
This read-only field shows the IP address of the destination that Local IP reports are send
to. Through its use of DHCP, ALEOS detects if there is a connected device and designates
that device's IP as the local IP destination. When no device is connected at startup, ALEOS
uses the first IP address in the Ethernet DHCP pool as the destination. When using Public
mode for an interface, that interface will be the local IP destination even if it's not the first
device connected.
Note: The Local Report Destination IP is not configurable. If you want a location report to
go to a specific device IP, use Server 1–4 configuration. (See
Enables odometer reporting. Options are:
Disable (default)
•
Enable
•
Note: Only applies for RAP report types.
Enables digital input reporting. Options are:
Disable (default)
•
Enable
•
Note: Only applies for RAP report types.
246
Use Device
Servers 1 to 4 on page 229.)
41111088