Rev 1 Dec. 17
7. Click Apply.
8. Reboot the AirLink gateway.
9. Use a Telnet or SSH terminal client such as Putty or Teraterm to connect to
the appropriate port:
· If you are using login, Telnet to the port specified in the Device Port field
(default is 12345). SSH is not available with login.
· If you are not using login, you can Telnet or SSH into the port specified in
the Remote Login Server Telnet/SSH Port field (default is 2332).
10. If prompted, log in with the following credentials:
· User name: sconsole
· Password: 12345 (default)
For information on changing the default reverse telnet password, see
Password
on page 307.
269
Serial Configuration
Change
41111088