Sierra Wireless AirLink RV50 Series User Manual page 141

Field
General
VPN # Type
VPN # Status
Set VPN Policy
Rev 1 Dec. 17
Description
Use this field to select the type of VPN tunnel. If you configure custom settings, they are
saved and the tunnel can be disabled and re-enabled without needing to re-enter the
settings.
Options are:
Tunnel Disabled (default)
•
IPsec Tunnel
•
GRE Tunnel
•
SSL Tunnel (only available for VPN 1)
•
Status of the VPN connection:
Disabled—VPN is disabled (default)
•
Not Connected—The VPN failed to connect. This could be because of a mismatch in
•
the configuration between the client and the server, no data connection on the device,
etc.
Connected—The VPN is connected and ready to transmit traffic.
•
Configuration Error—This status appears when:
•
Two VPNs have the same Local Address and Remote Address
•
More than one VPN has the remote address set to "0.0.0.0"
•
When either of these errors exist, only the first of the conflicting VPNs is operational.
To determine which VPNs are in conflict:
1. Go to Admin > Configure Log.
2. For the VPN Subsystem, ensure that Display in Log is set to Yes. The Verbosity
can be either Info or Debug.
3. Click View Log.
4. The resulting log shows you which VPNs are in conflict.
After completing the VPN Configuration:
1. Click this button to apply the new settings.
2. Check the VPN Status field to confirm the status of the VPN connection. (See
Status.)
141
VPN Configuration
VPN #
41111088