Sim Slot 1 And 2 Configuration - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
WAN
LAN
Ethernet
Figure 4-9: IPv6 support network
To configure the gateway to use IPv6 addressing:
1. In ACEmanager, go to the Status > Home screen.
2. If the Network Interface field value is anything other than Cellular, go to the
WAN/Cellular screen > WAN Interface Priority Configuration section and set
the priority for Cellular to First.
3. Reboot the gateway.
IPv6 Technical Implementation Details
Sierra Wireless IPv6 supports:
• Linux operating system
• SLAAC addressing for clients
• Router advertisement for the IPv6 DNS server addresses
Note: Make sure rdnssd daemon is installed on your LAN client to take the IPv6 DNS
server addresses.
Troubleshooting tip: If you experience problems with Internet access, try setting
the MTU for LAN clients to 1280.

SIM Slot 1 and 2 Configuration

To configure the SIM card in slot 1 or 2:
1. In ACEmanager, go to WAN/Cellular, and from the left menu, select either
SIM Slot 1 Configuration or SIM Slot 2 Configuration.
The following examples show how to configure SIM Slot 1. The steps are the
same for SIM Slot 2.
80
Cellular
Sierra Wireless gateway
Wi-Fi
Internet
41111088