Sierra Wireless AirLink RV50 Series User Manual page 28

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
Figure 2-20: ALEOS software update in progress
Important:
Do not disconnect the AirLink gateway from the computer, and do not power
cycle or reset the gateway during the update. If you see any error messages, refer to the
Updating the ALEOS Software and Radio Module Firmware
6. Depending on the gateway and your Mobile Network Operator, you may be
prompted to update the radio module firmware.
If you do not receive a prompt, the radio firmware is up to date. Proceed to
step 9.
Only if prompted to update the firmware, proceed to step 9.
Figure 2-21: Prompt for Radio Module Firmware
7. Under Applying, click Browse... and navigate to the radio module firmware file
that was included in the .zip file you downloaded. This is an .iso file named for
the gateway's radio module and the mobile network operator's network (or
"GENERIC", if it is intended for more than one operator network). For
example, MC7354_GENERIC_2820.iso.
8. Click Upload Radio Firmware.
28
on page 475.
41111088