Sierra Wireless AirLink RV50 Series User Manual page 215

Field
SNMP Configuration
Enable SNMP
SNMP Version
SNMP Port
SNMP Contact
SNMP Name
SNMP Location
SNMP System
Description
Rev 1 Dec. 17
SNMPv3
Figure 8-18: ACEmanager: Management (SNMP) (Version 3)
Description
Allows you to enable/disable SNMP
Default is Disable.
Allows you to select either SNMP protocol Version 2 (default) or Version 3
communications.
Controls which port the SNMP Agent listens on:
1–65535
•
Default is 161.
•
This is a personal identifier of the contact person you want to address queries to. This is a
customer defined field.
This is the name of the device you want to refer to. This is a customer defined field.
Location of where your device is stored. This is a customer defined field.
Use this field to enter a system description, if desired. The default value, which appears
after the SNMP agent is enabled and the gateway rebooted, is the product name.
215
Services Configuration
41111088