Sierra Wireless AirLink RV50 Series User Manual page 230

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Note: These screens are
only visible when Location
is enabled. See Location
Service on page 227.
Rev 1 Dec. 17
The configuration fields are the same for each of the four servers, except that
Server 1 has the option to configure one or two redundant servers.
Note: These side tabs only appear if Location Service (on the Global Settings side tab) is
Enabled.
To configure one of the servers:
1. In ACEmanager, go to Location.
2. From the menu on the left side of the screen, select the Server you want to
configure.
Figure 9-4: ACEmanager: Location > Server 1
230 41111088