Sierra Wireless AirLink RV50 Series User Manual page 428

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table D-5: LAN AT Commands
Command
*DHCPHOSTEND
*DHCPNETMASK
*DHCPSERVER
*DNS1?
*DNS2?
*DNSUSER
*ETHMODE
*HOSTAUTH
Rev 1 Dec. 17
Description
Query or set the ending IP address for the Ethernet DHCP pool.
AT*DHCPHOSTEND? to query
AT*DHCPHOSTEND=d.d.d.d to set
d.d.d.d=last IP address in Ethernet DHCP pool
•
Query or set the Ethernet DHCP subnet mask.
AT*DHCPNETMASK? to query
AT*DHCPNETMASK=d.d.d.d to set
d.d.d.d=Ethernet DHCP subnet mask
•
Query or set the Ethernet DHCP server.
AT*DHCPSERVER? to query
AT*DHCPSERVER=n to set the DHCP server mode
n=0—Disable
•
n=1—Server
•
n=2—Auto
•
For a description of the settings, see
Query the primary DNS (*DNS1) and secondary (*DNS2) IP addresses.
AT*DNS1? to query DNS1
AT*DNS2? to query DNS2
Query or set the first alternate server for DNS override. (Applies only to primary DNS.)
AT*DNSUSER? to query
AT*DNSUSER=d.d.d.d
d.d.d.d=IP address of domain server
•
Query or set the Ethernet port mode
AT*ETHMODE? to query
AT*ETHMODE=n to set
n = 0—Auto
•
n = 1—LAN
•
n = 2—WAN
•
Query or set the Host Authentication mode for PPPoE only. (It does not set host
authentication for PPP/DUN.)
AT*HOSTAUTH? to query
AT*HOSTAUTH=n to set
n=0—None/Disables authentication for PPPoE (default).
•
n=1—Authentication through PAP
•
n=2—Authentication through PAP & CHAP
•
428
DHCP Mode on page 114.
41111088