ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Field
AT+CGSMS
Quick Test
Quick Test
Destination
Rev 1 Dec. 17
Description
Allows you to choose the technology used to send SMS messages. For most networks, use
the default setting (Do nothing).
Options are:
Do nothing (default)
•
Set AT+CGSMS=0—GPRS
•
Set AT+CGSMS=1—Circuit switched
•
Set AT+CGSMS=2—GPRS Preferred (Uses circuit switched if GPRS is not available)
•
Set AT+CGSMS=3—Circuit Switched Preferred (Uses GPRS if circuit switched is not
•
available)
Note: If your gateway is able to receive SMS messages, but is unable to send them, try
changing this field to Set AT+CGSMS=1.
Note: This field does not appear on CDMA/EV-DO devices or on LTE devices that fallback
to CDMA/EV-DO.
Allows you to send a test message to the destination entered in the Quick Test Destination
field.
Enter the phone number to use for the test message. Click Apply before clicking the Quick
Test button.
This field is cleared on reboot.
SMSM2M
SMS messages can be sent from the serial command interface. Enter
AT*SMSM2M="[phone] [message]". The phone number needs to be in the same
format as numbers entered in the Trusted Phone Number List.
The message must not exceed 140 characters. To send several messages back
to back, you must wait for the OK before sending the next message.
206
41111088