Sierra Wireless AirLink RV50 Series User Manual page 466

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table D-13: Applications > Data Usage Commands
Command
*DATAPLANUNITSSIM2
*DATAPREVDAY?
*DATAPREVDAYSIM1?
*DATAPREVDAYSIM2?
Rev 1 Dec. 17
Description
Query or set the units for the data usage report for the SIM card in Slot 2 (lower
slot).
AT*DATAPLANUNITSSIM2? to query
AT*DATAPLANUNITSSIM2=<unit> to set
<unit>=1—Sets the units to Megabytes (MB)
•
<unit>=2—Sets the units to Kilobytes (kB)
•
Examples:
AT*DATAPLANUNITSSIM2?
<unit>
OK
AT*DATAPLANUNITSSIM2=<units>
OK
Query the data usage for the previous day (in kB).
Example:
AT*DATAPREVDAY?
<value>
OK
If this command is used with an AirLink RV50 Series gateway, the query or set
applies to the Active SIM. Use
*DATAPREVDAYSIM2? to query or set a specific SIM card, based on the slot it
is installed in.
Query the data usage for the previous day (in kB) for the SIM card in Slot 1
(upper slot).
Example:
AT*DATAPREVDAYSIM1?
<value>
OK
Query the data usage for the previous day (in kB) for the SIM card in Slot 2
(lower slot).
Example:
AT*DATAPREVDAYSIM2?
<value>
OK
466
*DATAPREVDAYSIM1? or
41111088