Sierra Wireless AirLink RV50 Series User Manual page 417

Table D-4: WAN / Cellular AT Commands
Command
*MSROAMINGTOUT
*MSSCANTOUT
*NBSIMPRESENT?
*NETALLOWZEROIP
Rev 1 Dec. 17
Query or set the time in minute before switching to the inactive SIM card if active SIM
card is roaming.
AT*MSROAMINGTOUT? to query
AT*MSROAMINGTOUT=<n> to set
<n>=10–255
•
<n>=0—feature is disabled (default)
•
Query or set the time in minute before switching to the inactive SIM if the gateway is
unable to connect to the network.
AT*MSSCANTOUT? to query
AT*MSSCANTOUT=<n> to set
<n>=10–255
•
<n>=0—feature is disabled (default)
•
Query the number of SIM cards installed in the gateway.
AT*NBSIMPRESENT? to query
Example:
AT*NBSIMPRESENT?
<number of SIM cards present>
OK
Response:
1—One SIM card installed
•
2—Two SIM cards installed
•
Query or set allowing the device to get an IP address from the mobile network that
has the last octet as 0 (zero).
AT*NETALLOWZEROIP? to query
AT*NETALLOWZEROIP=n to set
n=0—Do not allow
•
n=1—Allow
•
Allows the device to use a WAN IP address that ends in zero (e.g. 192.168.1.0).
417
Description
AT Commands
41111088