Table 11-2: Serial Port Configuration > Advanced
Field
Advanced
Assert DSR
Assert DCD
DTR Mode
Rev 1 Dec. 17
Advanced
Figure 11-2: ACEmanager: Serial > Port Configuration > Advanced
Description
Assert DSR always when the device is in a data mode (UDP, TCP, etc.), or when the device
is in network coverage. Options are:
Always (default)
•
In Data Mode
•
In Coverage
•
You can also use an AT command to configure this field. See
Assert DCD always, or when the device is in a data mode (UDP, TCP, etc.) or when the
device is in network coverage. Options are:
Always
•
In Data Mode (default)
•
In Coverage
•
You can also use an AT command to configure this field. See
Use DTR from the serial device, or ignore DTR (same as
Use DTR
•
Ignore DTR (default)
•
271
Serial Configuration
&S
on page 461.
&C
on page 459.
S211
on page 463). Options are:
41111088