Serial - Sierra Wireless AirLink RV50 Series User Manual

Field
Serial Status
Serial Port
Serial Reserved by
External Application
Serial Port Mode
Login reverse telnet
Rev 1 Dec. 17

Serial

Figure 3-9: ACEmanager: Status > Serial
Description
Status of the serial port:
Enabled—The serial port is functional (default).
•
Disabled — The serial port has been manually disabled. To enable the serial port, go
•
to Port Configuration
Reservation status of the serial port:
Enabled—The serial port is reserved for ALEOS Application Framework (ALEOS AF),
•
and cannot be used for any other serial-related ALEOS features.
Disabled — The serial port is available for non-ALEOS AF, serial-related ALEOS
•
features.
To reserve the serial port for ALEOS AF, go to Applications > ALEOS Application
Framework > Serial Port Reserved. (See
Default power-up mode for the serial port. When the AirLink gateway is power-cycled, the
serial port enters the mode specified by this command after 5 seconds.
This field only appears when reverse telnet is selected as the Serial Port Mode.
Status of login for reverse telnet. For more information, see
page 267.
55
on page 264.
ALEOS Application Framework
Status
on page 296.)
Reverse Telnet/SSH on
41111088