Sierra Wireless AirLink RV50 Series User Manual page 440

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table D-8: Services AT Commands
Command
*MODEMNAME
SMS
+CMGD
Rev 1 Dec. 17
Description
Note: This AT command is only usable if AT*DYNDNS is set to 10 (IP
Manager).
Query or set the device name used by IP Manager. (This name is displayed
on the Status > Home page.)
AT*MODEMNAME? to query
AT*MODEMNAME=NAME to set (up to 20 characters long)
NAME=device name (for example, mydevice)
•
The value in *DOMAIN provides the domain zone to add to this name.
Example: If *MODEMNAME=mydevice and *DOMAIN=eairlink.com, the
device's fully qualified domain name is mydevice.eairlink.com.
Tip: Each device using IP Manager needs a unique name. I.e., two devices
cannot both be called "mydevice". One could be named "mydevice1" while
the other could be named "mydevice2".
This command and AT+CMGL
messages. To use these commands, the SMS mode must be set to Outbound
Only. (See SMS Modes on page 189.)
Use AT+CMGD to delete SMS messages.
AT+CMGD=<index>[,flag]
where:
<index> is the index number of the message
<flag> is:
0=Delete stored SMS messages with the indicated index number(s).
•
This is the default value.
1=Ignore the value of the index and delete all SMS messages whose
•
status is "received read".
2=Ignore the value of the index and delete all SMS messages whose
•
status is:
received read
•
stored unsent
•
3=Ignore the value of the index and delete all SMS messages whose
•
status is:
received read
•
stored unsent
•
stored sent
•
4=Ignore the value of the index and delete all SMS messages.
•
440
enable you to manage incoming SMS
41111088