Sierra Wireless AirLink RV50 Series User Manual page 94

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
Figure 4-18: ACEmanager: WAN/Cellular > Reliable Static Route (RSR) > Reliable Static Route
(RSR)
5. Select the interfaces for the primary and backup routes. The options are:
· Ethernet 1 (default for primary route)
· USB
· Cellular (default for backup route)
If you select Ethernet 1, you are given the option to enter a gateway IP
address that is used as the next hop for reaching the destination network.
· If the Tracking Object test completed in
field at the default value (0.0.0.0).
· If the Tracking Object test completed in
address in this field.
6. Set the Destination IP/Network and Destination Subnet Mask.
To configure the RSR destination as a network for this example, enter:
· 64.100.20.128 in the Destination IP/Network field.
· 255.255.255.252 in the Destination Subnet Mask field.
To configure the RSR destination as an individual host for this example, enter:
· 64.100.20.128 in the Destination IP/Network field.
· 255.255.255.255 in the Destination Subnet Mask field.
1. This applies to both the primary and the Backup interface.
94
step 2 was successful, leave this
step 2 failed, enter the gateway IP
1
41111088