Sierra Wireless AirLink RV50 Series User Manual page 328

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Field
Current Information
Type
Network Operator
Firmware Version
Active?
Network Operator
Version
Up to date?
Actions
Network Operator
Switching
ALMS Radio
Module Firmware
Update
Rev 1 Dec. 17
2. Use the information in the following table to install, update, or remove radio
module firmware.
Description
Shows the gateway's radio module
Shows the network operator associated with the radio module firmware
Shows the firmware version for the radio module firmware in use
Indicates whether or not the radio module firmware is currently in use
Indicates the Mobile Network Operator associated with the radio module firmware
Indicates the version number of the radio module firmware
Indicates if the firmware in use matches the ALEOS-referenced radio module firmware
Action buttons beside each radio module firmware listed, enable you to:
Update—Click to update the radio module firmware for that RMID. Updating the active
•
radio module firmware updates the version in storage and also updates the firmware on the
radio module at the next reboot. To reboot, click the Activate button or the reboot button on
the top right side of the screen.
Remove—Click to remove that radio module firmware from the gateway storage
•
Note: The firmware cannot be removed if it is the active firmware.
Activate—Click to select a radio module firmware to be the active firmware for the gateway.
•
This option is only available if
Selecting the Radio Module
Passthru mode. (See
You can also:
Install—Click to add an additional radio module firmware image to the gateway storage.
•
When the maximum number of radio module firmware versions are stored on the gateway,
the Install button is not available. To free up space to add another version, first remove one
of the firmware versions on the gateway.
Enable or disable Network Operator Switching
Enable—When the gateway powers on or reboots, it automatically selects and uses the
•
appropriate radio module firmware for the installed primary SIM card, if it is stored on the
gateway. If there is no SIM card installed in the primary SIM card slot, the gateway switches
to the SIM card in the secondary SIM card slot. (default)
Disable—The gateway does not automatically select the appropriate radio module
•
firmware when it is powered on or rebooted. You can manually select the firmware to use.
See Manually Selecting the Radio Module
Enables you to choose which radio module firmware ALMS will update when you update
ALEOS:
Update Current Only—Only the radio module firmware in use is updated, if required
•
(default)
Update All—All the radio module firmware stored on the gateway is updated, if required
•
Network Operator Switching
Firmware. A reboot is only required if the gateway is in
page 320.)
Firmware.
328
is set to Disable. See Manually
Radio
41111088