Relay Link - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
4. Complete the SMS Information section with the recipient's phone number and
the desired message to be included with the information from the Data
Groups. The combined message and Data Group information cannot exceed
140 characters.
5. In the Data Group section, select any data you would like to be included in the
SMS (CDMA-related options are only available on the RV50). For more infor-
mation on the options, see
6. Click Apply.
The name you assigned to the Action appears under Actions. You can click on
this any time to modify the settings.
7. Optional—If desired, after you have updated all the fields and clicked the
Apply button, wait until the progress circle disappears (about 30 seconds),
and then click the Test report button to send a test SMS.
8. Click Events on the menu on the left and follow the instructions on
Types on page 260 to configure the Event you want associated with this
Action and to link the Action to the Event.

Relay Link

When an event occurs, you can signal or control connected devices using the
gateway's relay outputs. The power connector has one relay.
Note: The relays are capable of switching small loads. If you need to switch a larger load,
such as to open a door lock, connect the AirLink gateway's relay to an externally powered
switch.
To configure ALEOS to turn a relay link on or off:
1. On the Events Reporting tab, select Actions from the menu on the left.
2. Enter the desired Action Name.
3. From the drop-down menu in the Action Type field, select Relay Link.
252
Report Data Group on page 257.
Event
41111088