Sierra Wireless AirLink RV50 Series User Manual page 325

Rev 1 Dec. 17
Actions on the View Log screen include:
• Auto Refresh — The drop-down menu allows you to set up an automatic log
page refresh, and the interval between refreshes: 30 secs, 1 minute, or
2 minutes.
• Refresh button — Clears the screen, reloads the log file, and display the point
in the log file you were viewing immediately prior to clicking Refresh. Any new
log information is added to the bottom of the log.
• Clear button — Clears the screen
• Save button — Creates a text file of the log that you can save to your
computer
• Mark button—Marks the start of a section in the device log and is typically
used for troubleshooting
If asked to do so:
1. Click the Mark button and enter the text you want to appear in the log file.
Alphanumeric characters, spaces, periods, commas, dashes, colons and
semi-colons are allowed.
2. Click Mark Now.
3. Click Refresh.
The mark appears at the end of the log.
4. Click Save and save the file to your computer.
325
Admin
41111088