Sierra Wireless AirLink RV50 Series User Manual page 444

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table D-8: Services AT Commands
Command
*SNMPROUSERAUTHTYPE
*SNMPROUSERSECLVL
SNMP Read/Write Configuration
*SNMPRWCOMMUNITY
*SNMPRWUSER
*SNMPRWUSERAUTHTYPE
*SNMPRWUSERSECLVL
*SNMPRWUSERPRIVTYPE
SNMP TRAP Configuration
*SNMPENGINEID
*SNMPTRAPAUTHTYPE
Rev 1 Dec. 17
Description
Query or set the read only authentication type in SNMPv3.
AT*SNMPROUSERAUTHTYPE? to query
AT*SNMPROUSERAUTHTYPE=n
n=0—MD5
•
n=1—SHA
•
Query or set the read only security level in SNMPv3.
AT*SNMPROUSERSECLVL? to query
AT*SNMPROUSERSECLVL=n to set
n=0—none
•
n=1—authentication only
•
n=2—authentication + privacy
•
Read/write community string in SNMPv2 and SNMPv3.
(SNMP equivalent of a password; for example: private)
Query or set a read/write SNMP username string in SNMPv2 and SNMPv3.
Query or set the read/write authentication type in SNMPv3.
AT*SNMPRWUSERAUTHTYPE? to query
AT*SNMPRWUSERAUTHTYPE=n to set
n=0—MD5
•
n=1—SHA
•
Query or set the read/write security level in SNMPv3.
AT*SNMPRWUSERSECLVL? to query
AT*SNMPRWUSERSECLVL=n to set
n=0—none
•
n=1—authentication only
•
n=2—authentication + privacy
•
Query or set the read/write privacy type in SNMPv3.
AT*SNMPRWUSERPRIVTYPE? to query
AT*SNMPRWUSERPRIVTYPE=n to set
n=0—DES
•
n=1—AES
•
Specify an identification name string for a SNMP engine in SNMPv3.
(For example: Shark-0012E8)
Query or set the SNMP TRAP authentication type in SNMPv3.
AT*SNMPTRAPAUTHTYPE? to query
AT*SNMPTRAPAUTHTYPE=n to set
n=0—MD5
•
n=1—SHA
•
444 41111088