Sierra Wireless AirLink RV50 Series User Manual page 154

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
3. Click "Add More" to display a rule line.
Figure 7-2: ACEmanager: Security > Port Forwarding (Single Port)
4. In the Public Start Port field, enter the desired public network port number.
Values between 1 and 65535 are supported, although Sierra Wireless recom-
mends using a value greater than 1024.
Unsolicited data coming in on this port is forwarded to the port you select in
the Private Start Port field.
5. In the Public End Port field, enter 0.
6. Select the desired protocol (see
· TCP
· UDP
· TCP & UDP
7. Enter the IP address of the computer you want to forward data to.
8. In the Private Start Port field, enter the number of the port on the destination
computer that you want to forward data to.
9. Click Apply.
You do not need to reboot immediately, if you have additional changes to
make, but port forwarding does not take effect until the device is rebooted.
The Port Forwarding screen allows for 24 port forwarding rules.
10. Optional—If you need additional port forwarding rules, click Extended Port
Forwarding on the left menu, and continue adding rules, up to a total over
both screens of 48.
154
Protocol on page 157):
41111088