Radio Passthru; Log - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Field
Reset Mode
(continued)
Diagnostic shell
access
Rev 1 Dec. 17
Description
•
When enabled, this field allows Sierra Wireless TechSupport personnel to locally access
the diagnostic shell on your gateway. It should be left at the default setting unless Sierra
Wireless TechSupport asks you to change it.

Radio Passthru

Radio Passthru allows a direct connection, using USB, to the internal radio.
Normal cellular radio operation is suspended while Radio Passthru is enabled.
Radio Passthru is generally used only in certain troubleshooting scenarios.
The hardware bypass remains in effect until the gateway is rebooted.
Note: Because Radio Passthru is not USB/net or USB/serial, a different set of drivers are
required to connect to the radio installed inside an AirLink gateway. Additionally, while it is
possible to send AT commands to the radio using a terminal connection, there are software
applications designed to communicate with the radio directly. If you need to use Radio
Passthru, contact your Sierra Wireless AirLink representative to obtain the needed drivers
and/or software application.
Figure 14-4: ACEmanager: Admin > Radio Passthru

Log

The Log file is a system log of the AirLink gateway.
The Logging configuration screen enables you to configure log verbosity and
display filtering. The View Log screen enables you to view and save logs. The
logs are in plain text.
320 41111088