Sierra Wireless AirLink RV50 Series User Manual page 45

Hide thumbs Also See for AirLink RV50 Series:
Table of Contents

Advertisement

Field
DHCP Auto Status
USB Mode
Connected Clients
VRRP Mode
Ethernet Port Status
Port Number
Status
Packets Sent
Packets Received
Ethernet WAN
Ethernet State
Ethernet State Details
Ethernet End-to-End
Connection
Ethernet IP Address
Rev 1 Dec. 17
Description
Status of DHCP mode (This field only appears when the DHCP mode is Auto.)
Server—ALEOS is acting as a DHCP server.
Client—ALEOS is acting as a DHCP client.
Which USB port mode is set (USBnet, USB serial, or Disabled)
Number of connected devices that obtained their IP address through DHCP over Ethernet
or USBnet. The value in this field does not include devices connected via PPP or PPPoE.
VRRP status
Port number (The number of Ethernet ports available varies depending on the gateway.)
Status of the Ethernet port(s):
Disabled—The Ethernet port has not been enabled (Default)
Link Speed—Link speed depends on the gateway and the network
Disconnected—No device is connected to the Ethernet port
Disabled (Public IP)—The Connection mode is set to "Ethernet Uses Public IP". All
the Ethernet ports except the Public Mode Ethernet port are automatically disabled.
Number of packets sent over the Ethernet port
Number of packets received over the Ethernet port
Current state of the Ethernet connection:
Connected
Not Connected
No Service
Provides additional details about the current Ethernet connection status. Possible
messages are:
IP Acquired
Disconnected
Not configured for WAN
Describes the state of the Ethernet network connection, based on Ethernet network
monitoring (see
Ethernet > Monitor
Not Verified—The monitoring function is set to disable and therefore the availability of
the Ethernet network cannot be verified.
Pending—The monitoring function is enabled, but has not yet completed its test. Once
the first test is complete, this option only appears again if monitoring is disabled and
then re-enabled.
Established—The monitoring system has determined that service is available on the
cellular network.
Not Established—The monitoring system has determined that the cellular interface
has no service (ping test failed).
Ethernet IP address
45
on page 89). Possible states are:
Status
41111088

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents