Sierra Wireless AirLink RV50 Series User Manual page 211

Field
Message Subject
Quick Test
Quick Test
Destination
Test status
SSL/TLS
Encryption
Verify Peer Certificate
Load Trusted CA
Certificate
Trusted CA Certificate
Name
Rev 1 Dec. 17
Description
Allows configuration of the default Subject to use if one is not specified in the message by
providing a "Subject: xxx" line as the initial message line.
subject = message subject
•
After completing the other fields on this screen, click the Quick Test button to send a test
email. The status of the test appears in the
Enter the email address you want the test email sent to.
After you press the Quick Test button, the status of the email test appears in this field.
Choose the encryption method:
None—No encryption is used (default)
•
SSL—Use a secure connection directly
•
StartTLS—Transforms an non-secure connection to a secure one
•
For SSL and StartTLS default ports, see
Choose whether or not to use a peer certificate
Disable—No certificate is used (default)
Enable—Verifies that the server name used for the connection matches the name and
alternative names in the certificate loaded using the
To load a certificate:
1. Click the Load Trusted CA Certificate button.
2. Click browse and navigate to the certificate you want to load.
3. Click Upload File to Device.
Note: Because the starting and expiration dates of the certificate are checked, the date
used by the device must be correct. Sierra Wireless strongly recommends that you enable
Network Time Protocol (NTP) on the Services > Time (SNTP) tab.
The name of the loaded certificate appears in this field.
211
Services Configuration
Test status field.
Port on page 210.
Load Trusted CA Certificate field.
41111088