Sierra Wireless AirLink RV50 Series User Manual page 148

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Field
General
VPN 1 Type
VPN 1 Status
Set VPN Policy
OpenVPN Role
Tunnel Mode
Protocol
Peer Port
Peer Identity
Encryption Algorithm
Authentication
Algorithm
Compression
Load Root Certificate
Root Certificate Name
Client Certificate
Load Client
Certificate
Client Certificate
Number
Load Client
Certificate Key
Client Certificate Key
Name
User Name
User Password
Rev 1 Dec. 17
Description
Options are: Tunnel Disabled or OpenVPN Tunnel. Enabling the OpenVPN Tunnel will
expose other options for configuring the tunnel.
Indicates the status of the OpenVPN tunnel on the device
Options are: Disabled, Connected or Not Connected
After completing the VPN Configuration:
1. Click this button to apply the new settings (or reboot the device).
2. Check the VPN Status field to confirm the status of the VPN connection. (See
Status.)
The AirLink gateway can only be an OpenVPN client. Default: Client
The Tunnel Mode is set to "Routing".
Displays the protocol used for configuration. Only supports UDP
The Peer Port is the UPD port on the peer device.
Enter the IP address or Fully Qualified Domain Name (FQDN) of the peer device.
Options are: DES, Blowfish, DES, Cast128, AES-128, and AES-256
Options are: MD5, SHA-1, and SHA-256
Options are: LZ0 or NONE
Loads the server root CA (Certificate Authority) certificate
When you click the button, a window pops up and enables you to browse and select the file
containing the root CA certificate.
Displays the name of the most recently uploaded root certificate
Enables or disables use of a client certificate.
This field appears only if Client Certificate is enabled.
Loads the client certificate
When you click the button, a window pops up and enables you to browse and select the file
containing the client certificate.
Displays the number of the most recently uploaded client certificate.
This field appears only if Client Certificate is enabled.
Loads the client certificate key
When you click the button, a window pops up and enables you to browse and select the file
containing the client certificate key.
Displays the name of the most recently uploaded client certificate key
The user name required for client authentication
The user password required for client authentication
148
VPN 1
41111088