Device Updates - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table D-1: Device Update AT Commands
Command
*FWRMUPDATE
I4
*RCVRUPDATE
Rev 1 Dec. 17

Device Updates

Description
This AT command updates the ALEOS software and, if required, the radio module firmware,
remotely.
The ALEOS software file must be on an ftp server.
The command parameters are:
AT*FWUPDATE= <FTP Server IP>,<FTP Server username>,<FTP Server
password>,<ALEOS filename>[,<Radio module firmware filename>]
Example:
AT*FWRMUPDATE=192.168.17.111,MyUserName,v3yieo,GX_4.3.4.001v0.bin,MC8705_OSM
001_T1043D.bin
Error messages:
Firmware update failed: could not get file from FTP server—Firmware file does not exist;
•
check that the file name was spelled correctly
RM file is required—the update you are attempting requires a radio module update
•
Query the Recovery version installed on the gateway
Example:
ATI4?
returns 2.0 - 31934
Use this AT command to install or update the Recovery manager. (See
page 15.)
The Recovery Manager file (available from source.sierrawireless.com) must be on an ftp server.
The command parameters are:
AT*RCVRUPDATE= <FTP Server IP>,<FTP Server username>,<FTP Server
password>,<Recovery manager filename>
Example:
AT*RCVRUPDATE=192.168.17.111,MyUserName,v3yieo,uImage.recovery.bin
400
Recovery Mode on
41111088