Sierra Wireless AirLink RV50 Series User Manual page 414

Hide thumbs Also See for AirLink RV50 Series:
Table of Contents

Advertisement

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table D-4: WAN / Cellular AT Commands
Command
*ETHWAN_STATICDNS1
*ETHWAN_STATICDNS2
*ETHWAN_STATICGTWY
*ETHWAN_STATICIP
*ETHWAN_STATICMASK
*EVDODATASERV
Rev 1 Dec. 17
Query or set the static IP address for the primary or secondary Ethernet WAN DNS
server
AT*ETHWAN_STATICDNS1? to query the IP address for the primary DNS server
AT*ETHWAN_STATICDNS2? to query the IP address for the secondary DNS server
AT*ETHWAN_STATICDNS1=n.n.n.n to set the IP address for the primary DNS
server
AT*ETHWAN_STATICDNS2=n.n.n.n to set the IP address for the secondary DNS
server
Example:
AT*ETHWAN_STATICDNS1=208.67.222.222
Query or set the static IP address for the Ethernet WAN gateway
AT*ETHWAN_STATICGTWY? to query
AT*ETHWAN_STATICGTWY=n.n.n.n to set
Example:
AT*ETHWAN_STATICGTWY=208.81.123.254
Query or set the static IP address for the AirLink RV50
AT*ETHWAN_STATICIP? to query
AT*ETHWAN_STATICIP=n.n.n.n to set
Example:
AT*ETHWAN_STATICIP=208.81.123.34
Query or set the subnet mask for the AirLink RV50 static IP address
AT*ETHWAN_STATICMASK? to query
AT*ETHWAN_STATICMASK=n.n.n.n to set
Example:
AT*ETHWAN_STATICMASK=255.255.255.0
CDMA and LTE fallback to EV-DO only.
Query or set the allowable network type.
AT*EVDODATASERV? to query
AT*EVDODATASERV=n to set
n=0—EV-DO Preferred — can "fall back" on CDMA/1x
(only available on EV-DO devices)
n=0—LTE Preferred — can "fall back" on CDMA/EV-DO
(only available on LTE devices)
n=1—EV-DO Only — fallback disabled (only available on 1x/EV-DO devices)
n=2—1x Only — EV-DO disabled (only available on 1x/EV-DO devices)
n=3—CDMA Only — LTE disabled (only available on LTE devices)
n=4—LTE Only — Fallback disabled (only available on LTE devices)
Note: If you choose an option where fallback is disabled and the selected network
type is not available, the device will not be able to connect to the mobile network. For
example, if you select LTE Only and are in an area where no LTE network is
available, the device will not be able to connect to a mobile network until you change
this setting or move to an area with LTE coverage.
414
Description
41111088

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents