Consumption Measurement Procedure for more information regarding consumption measurement
procedures.
Consumption Waveform Samples
The consumption waveforms presented below have a typical VBATT voltage of 3.6V and are for an
EGSM900 network configuration.
Four significant operating mode consumption waveforms are shown in the following subsections,
namely:
•
Connected Mode (PCL5: Tx power 33dBm)
•
Transfer mode (GPRS class 10, gam.3: Tx power 33dBm )
•
Idle mode (Paging 2)
•
Idle mode (Paging 9)
Note:
The following diagrams only show the waveform of the current, and not the exact values.
Connected Mode Current Waveform
WA_DEV_W228_PTS_002
Rev 001
Product Technical Specification &
Customer Design Guidelines
TX PEAK
Page 34 of 108