Tacacs+ Authentication - Sierra Wireless AirLink RV50 Series User Manual

Rev 1 Dec. 17
Figure 8-21: ACEmanager: Services > Authentication > RADIUS
3. Configure the other fields as described in the following table.
Field
RADIUS Server RADIUS server IP address or resolvable domain name
Port By default, RADIUS uses UDP port 1812
Timeout (seconds) The time limit for the server to respond
•
Default is 30 seconds.
Note: If the server does not respond during the timeout (no route
to host, server down, network too slow etc.), the authentication
fails and the next enabled authentication mechanism checks the
credentials.
Secret Shared secret for configured server
4. Click Apply.

TACACS+ Authentication

Terminal Access Controller Access-Control System Plus (TACACS+) uses TCP
protocol and encrypts the entire packet, except the header.
To configure TACACS+:
1. Go to Services > Authentication.
2. In the TACACS+ Client field, select Enable.
221
Description
1–60 seconds
Services Configuration
41111088