Sierra Wireless AirLink RV50 Series User Manual page 435

Table D-6: VPN Commands
Command
*IPSEC1_REMOTE_ID_TYPE
*IPSEC2_REMOTE_ID_TYPE
*IPSEC3_REMOTE_ID_TYPE
*IPSEC4_REMOTE_ID_TYPE
*IPSEC5_REMOTE_ID_TYPE
*IPSEC1_SHARED_KEY1
*IPSEC2_SHARED_KEY1
*IPSEC3_SHARED_KEY1
*IPSEC4_SHARED_KEY1
*IPSEC5_SHARED_KEY1
*IPSEC1_STATUS?
*IPSEC2_STATUS?
*IPSEC3_STATUS?
*IPSEC4_STATUS?
*IPSEC5_STATUS?
*IPSEC1_TUNNEL_TYPE
*IPSEC2_TUNNEL_TYPE
*IPSEC3_TUNNEL_TYPE
*IPSEC4_TUNNEL_TYPE
*IPSEC5_TUNNEL_TYPE
Rev 1 Dec. 17
Description
Query or set the remote (Peer Identity) ID type for the # VPN.
AT*IPSEC[VPN number]_REMOTE_ID_TYPE? to query
AT*IPSEC[VPN number]_REMOTE_ID_TYPE=n to set
n=1—IP
•
n=2—FQDN
•
n=3—User FQDN
•
Note:
FQDN allows you to use a fully qualified domain name (FQDN) e. g.,
•
modemname.domainname.com
User FQDN allows you to use a user FQDN whose values should
•
include a username (e.g. user@domain.com)
Query the pre-shared Key (PSK) used to initiate the # VPN tunnel.
AT*IPSEC[n]_SHARED_KEY1?
[n]=server number
Query the VPN # connection status.
AT*IPSEC[VPN number]_STATUS? to query
Disabled
•
Not Connected
•
Connected
•
Note: Use this when troubleshooting a VPN # connection.
Query or set the VPN # tunnel type.
AT*IPSEC[VPN number]_TUNNEL_TYPE? to query
AT*IPSEC[VPN number]_TUNNEL_TYPE=n to set
n=0—Disable the tunnel (default)
•
n=1—IPsec Tunnel
•
n=2—GRE Tunnel
•
n=3—SSL Tunnel
•
Note: For a successful configuration, all settings for the VPN tunnel
must be identical between the AirLink gateway VPN and the enterprise
VPN server.
435
AT Commands
41111088