Step 2-Update The Aleos Software And Radio Module Firmware - Sierra Wireless AirLink RV50 Series User Manual

Rev 1 Dec. 17
Important:
BE PATIENT!
Waiting for the process to complete is faster than troubleshooting the problems that can be
caused by interrupting the process midway.
to return the gateway to the factory for repairs.)
Step 2—Update the ALEOS Software and Radio
Module Firmware
Using ACEmanager to Update a Single AirLink Gateway
To update the ALEOS software and radio module firmware on one AirLink
gateway:
1. Connect the AirLink gateway you want to update to your laptop, launch your
browser and enter the URL for the gateway. The default IP address/port for
the Ethernet interface is http://192.168.13.31:9191. If it is a remote gateway,
enter the domain name or public IP (WAN) address.
Note: If you are connected to the gateway remotely, any files transferred to the gateway
are transferred over-the-air and you may incur data charges.
2. Log in to ACEmanager.
Default user name: user
Default password: 12345
3. Click the Software and Firmware link.
The Software and Firmware update window opens.
Note: These instructions show typical Software and Firmware update windows. Details
such as the ALEOS version, device model, radio firmware version, etc. may vary,
depending on the gateway you are updating.
Figure 2-15:
25
The firmware update can take up to 30 minutes to complete.
(Interrupting the process may result in having
Gateway Configuration
41111088