Sierra Wireless AirLink RV50 Series User Manual page 298

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Field
CPU Load
(Last 15 minutes)
ALEOS Application
Framework
Serial Port Reserved
QCOM DM Port
Resource Reserve
AAF Applications
Application Name
Autostart
Version
Status
Actions
Rev 1 Dec. 17
Description
CPU load, averaged over the last 15 minutes and updated every 30
seconds
The CPU load relates to how many applications are attempting to
execute in parallel over the 15-minute period. If the load is greater than
1, some applications are waiting for CPU capacity to become available
and may be delayed in launching.
Enable or disable (default) the ALEOS Application Framework (ALEOS
AF). If enabled, ALEOS AF starts at boot time. When the Reset to
Factory default button on the Admin > Advanced page is pressed,
ALEOS AF is disabled.
Select Enable to reserve the serial port for ALEOS AF. When this field
is set to Enable, the serial port cannot be used for any other serial-
related ALEOS features. The options are:
Disable (default)
•
Enable
•
Reserves the QCOM DM port for ALEOS AF applications. Options are:
Enable (Reserve access for ALEOS AF) or Disable (Reserve access
for ALEOS). Default: Disable
If there is no AAF applications enabled and started, one of the
following messages is displayed:
"AAF not activated"—AAF is not enabled
•
"AAF not started"—AAF is not yet started
•
"No AAF Application installed"
•
When AAF is enabled and started, you can install an application. To
install an application:
1. Click Browse... and navigate to the application you want to install.
2. Click the Install AAF Application button.
For installed applications, the table shows the:
Application name
•
Autostart—true or false
•
Version
•
Status—started or stopped
•
Use the Stop/Start, Uninstall, and Details buttons to manage your
applications. For more information on the Details button, refer to
AAF—Customizing UI Elements on source.sierrawireless.com.
298 41111088