Download Print this page

Huawei Quidway NetEngine80E Configuration Manual page 151

Universal service router, ip routing
Hide thumbs Also See for Quidway NetEngine80E:

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
l
l
l
l
Procedure
Step 1 Configure an IPv6 address for each interface.
The configuration details are not described here.
Step 2 Configure IPv6 static routes.
# Configure an IPv6 default route on Router A.
[RouterA] ipv6 route-static :: 0 pos 1/0/0
# Configure two IPv6 static routes on Router B.
[RouterB] ipv6 route-static 2001:db8:1:: 64 pos 1/0/0
[RouterB] ipv6 route-static 2001:db8:3:: 64 pos 2/0/0
# Configure an IPv6 default route on Router C.
[RouterC] ipv6 route-static :: 0 pos 1/0/0
Step 3 Configure host addresses and gateways.
Configure IPv6 addresses for hosts according to the networking diagram, and set default gateway
addresses of PC1, PC2, and PC3 to 2001:db8:1::1, 2001:db8:2::1, and 2001:db8:3::1
respectively.
Step 4 Verify the configuration.
# Check the IPv6 routing table of Router A.
[RouterA] display ipv6 routing-table
Routing Table : Public
Destination
NextHop
Cost
RelayNextHop : ::
Interface
Destination
NextHop
Cost
RelayNextHop : ::
Interface
Destination
NextHop
Cost
RelayNextHop : ::
Interface
Destination
Issue 02 (2014-09-30)
Static route with the destination address and outbound interface being 2001:db8:1:: 64 and
POS 1/0/0 respectively of Router B
Static route with the destination address and outbound interface being 2001:db8:3:: 64 and
POS 2/0/0 respectively of Router B
Default route with the outbound interface being POS 1/0/0 of Router C
Default gateway addresses of PC1, PC2, and PC3 being 2001:db8:1::1, 2001:db8:2::1, and
2001:db8:3::1 respectively
Destinations : 5
: ::
: FE80::E0:FCD5:A2BF:401
: 0
: Pos1/0/0
: ::1
: ::1
: 0
: InLoopBack0
: 2001:db8:1::
: 2001:db8:1::1
: 0
: GigabitEthernet2/0/0
: 2001:db8:1::1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Routes : 5
PrefixLength : 0
Preference
Protocol
TunnelID
Flags
PrefixLength : 128
Preference
Protocol
TunnelID
Flags
PrefixLength : 64
Preference
Protocol
TunnelID
Flags
PrefixLength : 128
2 IP Static Route Configuration
: 60
: Static
: 0x0
: D
: 0
: Direct
: 0x0
: D
: 0
: Direct
: 0x0
: D
126

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Quidway netengine40eNe40eNe80e