Huawei Quidway NetEngine80E Configuration Manual page 159

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
detects a link fault, BFD rapidly notifies that the bound static route becomes unavailable. If the
static route is not bound to a BFD session, the default route 0.0.0.0/0 will always exist in IP
routing table, this may cause traffic loss.
[RouterA] display ipv6 routing-table
Routing Table : Public
Destination
NextHop
Cost
RelayNextHop : ::
Interface
----End
Configuration Files
l
l
Issue 02 (2014-09-30)
Destinations : 1
: ::1
: ::1
: 0
: InLoopBack0
Configuration file of Router A
#
sysname RouterA
#
ipv6
#
bfd
#
interface GigabitEthernet 1/0/0
undo shutdown
ipv6 enable
ipv6 address 2001:db8:1::1/64
#
bfd aa bind peer-ipv6 2001:db8:1::2
discriminator local 10
discriminator remote 20
commit
#
ipv6 route-static :: 0 2001:db8:1::2 track bfd-session aa
#
return
Configuration file of Router B
#
sysname RouterB
#
ipv6
#
bfd
#
interface GigabitEthernet 1/0/0
undo shutdown
shutdown
ipv6 enable
ipv6 address 2001:db8:1::2/64
#
interface Pos2/0/0
link-protocol ppp
ipv6 enable
ipv6 address 2001:db8:2::1/64
#
bfd bb bind peer-ipv6 2001:db8:1::1
discriminator local 20
discriminator remote 10
commit
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Routes : 1
PrefixLength : 128
Preference
Protocol
TunnelID
Flags
2 IP Static Route Configuration
: 0
: Direct
: 0x0
: D
134