Huawei Quidway NetEngine80E Configuration Manual page 149

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
--- 1.1.3.1 ping statistics ---
# Run the tracert command on Router A to verify the connectivity.
[RouterA] tracert 1.1.3.1
traceroute to
break
1 1.1.4.2 31 ms
2 1.1.4.6 62 ms
----End
Configuration Files
l
l
l
Issue 02 (2014-09-30)
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 62/62/63 ms
1.1.3.1(1.1.3.1), max hops: 30 ,packet length: 40,press CTRL_C to
32 ms
63 ms
Configuration file of Router A
#
sysname RouterA
#
interface GigabitEthernet2/0/0
ip address 1.1.1.1 255.255.255.0
#
interface Pos1/0/0
link-protocol ppp
ip address 1.1.4.1 255.255.255.252
#
ip route-static 0.0.0.0 0.0.0.0 1.1.4.2
#
return
Configuration file of Router B
#
sysname RouterB
#
interface GigabitEthernet3/0/0
ip address 1.1.2.1 255.255.255.0
#
interface Pos1/0/0
link-protocol ppp
ip address 1.1.4.2 255.255.255.252
#
interface Pos2/0/0
link-protocol ppp
ip address 1.1.4.5 255.255.255.252
#
ip route-static 1.1.1.0 255.255.255.0 1.1.4.1
ip route-static 1.1.3.0 255.255.255.0 1.1.4.6
#
return
Configuration file of Router C
#
sysname RouterC
#
interface GigabitEthernet2/0/0
ip address 1.1.3.1 255.255.255.0
#
interface Pos1/0/0
link-protocol ppp
ip address 1.1.4.6 255.255.255.252
#
ip route-static 0.0.0.0 0.0.0.0 1.1.4.5
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31 ms
62 ms
2 IP Static Route Configuration
124