Selecting A Password-Protected Serial Hub - Siemens 7XV5655-0BA00 Application Instructions

English 7XV5655-0BA00

Selecting a Password-Protected Serial Hub

The password is for activation of the configuration mode with the configuration tool and for
establishing the link. If no password is assigned, this must be entered in the configuration
tool under 'Password required'=false.
Entering a Password
To enter a password, call 'Change Password' from the configuration tool and enter the
password under 'New Password' and then under 'Retype New Password' before pressing
"Enter". The password has up to 8 digits.
To be able to access a password-protected Serial Hub later from the computer from which
the application will be started, the password must be entered on this computer.
Entering the log-in
To access parameter entry from the configuration tool, an assigned password must be
entered in 'Login'.
Entering an Incorrect Password
If you enter the wrong password, the message "Invalid Password" is displayed.
Password transfer by the application
If a password has been assigned, it must be passed on from the application.
For this purpose, the Serial Hub must also be configured once from the application
computer. This is done using the configuration tool.
40 / 53 C53000-G1176-C174-3