Allied Telesis AR2050V Command Reference Manual page 108

F C M
ILE AND ONFIGURATION ANAGEMENT
Valid characters The filename and path can include characters from up to four categories. The
categories are:
1)
2)
3)
4)
Do not use spaces, parentheses or the + symbol within filenames. Use hyphens or
underscores instead.
Syntax for A leading slash (/) indicates the root of the current filesystem location.
directory listings
In commands where you need to specify the local filesystem's Flash base directory,
you may use flash or flash: or flash:/. For example, these commands are all the
same:
•
•
•
Similarly, you can specify the USB storage device base directory with usb or usb:
or usb:/
You cannot name a directory or subdirectory flash, nvs, usb, card, tftp, scp, sftp
or http. These keywords are reserved for tab completion when using various file
commands.
Command List •
•
•
•
C613-50186-01 Rev B
C
OMMANDS
uppercase letters: A to Z
lowercase letters: a to z
digits: 0 to 9
special symbols: most printable ASCII characters not included in the previous
three categories, including the following characters:
• -
• /
• .
• _
• @
• "
• '
• *
• :
• ~
• ?
dir flash
dir flash:
dir flash:/
"autoboot enable" on page 110
"boot config-file" on page 111
"boot config-file backup" on page 112
"boot system" on page 113
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
108