Show Static-Channel-Group - Allied Telesis AT-8100L/8 User Manual

SHOW STATIC-CHANNEL-GROUP

Syntax
show static-channel-group
Parameters
None
Modes
User Exec mode and Privileged Exec mode
Description
Use this command to display the member ports of static port trunks on the
switch. An example of the command is shown in Figure 141.
% Static Aggregator: sa1
% Member:
port1.0.5
port1.0.6
port1.0.7
% Static Aggregator: sa2
% Member:
port1.0.19
port1.0.20
port1.0.21
port1.0.22
Figure 141. SHOW STATIC-CHANNEL-GROUP Command
To view the load distribution methods of static port trunks, display the
running configuration with "SHOW RUNNING-CONFIG" on page 164.
Example
This example displays the member ports of a static port trunk:
awplus# show static-channel-group
AT-8100 Switch Command Line User's Guide
737